User manual

MCP355X Sensor Application Developer’s Board User’s Guide
DS51609A-page 30 © 2006 Microchip Technology Inc.
2 P2, P4 6 X 1 Header 2.54mm on center 6
mm/2.5mm
Samtec TSW-106-07-G-S
1 P3 5 X 2 Header 2.54mm on center 6
mm/2.5mm
Samtec TSW-105-07-G-D
2 P5, P8 20 X 2 Header 2.54mm on center 6
mm/2.5mm
Samtec TSW-120-07-G-D
2 P6, P7 6 X 2 Header 2.54mm on center 6
mm/2.5mm
Samtec TSW-106-07-G-D
2 P9, P10 3.5mm Plugable 3-Position Screw
Terminal Blocks
Keystone Electronics 8723
2 P9, P10 Conn header pins used W/TERM
BLK PLUG
Keystone Electronics 8724
1 PCB RoHS-compliant Bare PCB — 104-00090
10 R1, R5, R6,
R11, R13, R14,
R15, R20, R22,
R26
4.7K 1% 0805 Thick Film Chip
Resistor
Yageo
®
America RC0805FR-074K7L
2 R2, R3 RES 24.9 OHM 1/8W 1% 0805
SMD
Panasonic - ECG ERJ-6ENF24R9V
3 R4, R30, R31 RES 332 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF3320V
4 R7, R8, R9,
R10, R12
RES 475 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF4750V
1 R14 RES 887 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF8870V
11 R16, R17, R18,
R23, R24, R25,
R29, R45, R46,
R47, R48
RES 100 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF1000V
6 R19, R21, R27,
R28, R39, R42
RES 10.0 OHM 1/10W 1% 0805
SMD
Panasonic - ECG ERJ-3EKF10R0V
4 R32, R33, R34,
R35
RES 0.0 OHM 1/8W 5% 0805 SMD Panasonic - ECG ERJ-6GEY0R00V
2 R36, R37 1K Ohm 0.1% 0805 10ppm Thin
Film Chip Resistor
Susumu RG2012N-102-B-T1
2 R38, R43 100 Ohm 0.1% 0805 10ppm Thin
Film Chip Resistor
Susumu RG2012N-101-B-T1
2 R40, R41 5.1K Ohm 0.1% 0805 10ppm Thin
Film Chip Resistor
Susumu RG2012N-512-B-T1
1 R44 DO NOT INSTALL — —
4 SW1 - SW4 SWITCH TACT 6MM SMD MOM
230GF
Omron Electronics
Inc
B3S-1002
2 TP1, TP2 Wire Test Point 0.3" Length Nedco Electronics PJ-202-30
4 TP3, TP4 TP5,
TP6
DO NOT INSTALL — —
1 U1 5.0V 3-Terminal 800mA Positive
Regulator SOT-223
National
Semiconductor
®
LM1117-5.0
1 U2 44-Pin, High-Performance,
Enhanced Flash, USB
Microcontroller
Microchip
Technology Inc.
PIC18F4550-I/PT
1 U3 IC SOCKET STRAIGHT 40POS
.600 TIN
Assmann Electronics
Inc
A40-LC-TT-R
TABLE B-1: BILL OF MATERIALS (BOM) (CONTINUED)
Qty
Designator Description Manufacturer Part Number