User manual

MCP3425 SOT23-6 Evaluation Board User’s Guide
DS51787A-page 8 © 2009 Microchip Technology Inc.
FIGURE 1-2: MCP3425 SOT23-6 Evaluation Board with the PICkit™ Serial Analyzer.
1.3.1 PICkit™ Serial Analyzer PC Software Set-Up for the MCP3425
Evaluation Board
The following steps describe how to set up and use the PICkit Serial Analyzer PC
Graphic User Interface (GUI) to write the configuration bits of the MCP3425 on the
MCP3425 SOT23-6 Evaluation Board and read the ADC conversion results.
1. Install the PICkit Serial Analyzer software onto your personal computer (PC).
2. Connect the USB cable between the PICkit Serial Analyzer and your PC.
3. Run the PICkit Serial PC Software; the following graphic user interface (GUI) will
appear. Click the Next button and follow the instructions.
MCP3425 Evaluation Board
Sensor Input
Connectors
PICkit Serial Analyzer
Personal Computer
USB Cable
Connected between the
and Personal Computer
PICkit Serial analyzer