Datasheet

Quick Start Instructions

FIGURE 1-5: Reading Conversion Results: Note that the Input = 0.996V is applied at CH1. The

reading indicates the measured value is 0.996 Volts.

Requesting

5 Bytes

Reading Data

using a Read Command

5th Byte: Repeated Byte for Configuration byte

4th byte: Configuration Byte (note that RDYbit is “0”)

3rd byte: Data Byte

2nd byte: Data Byte

1st byte: Data Byte

Output code: F907 in hex ( = 63751 in decimal)

Output Voltage: 63751 x 15.625 µV (LSB) = 0.996 Volt with PGA = 1

Results:

PGA