Datasheet

MCP3424 Evaluation Board User’s Guide

3. Type in any script name (i.e., MCP3424_Read) in the space below the Script

Name menu.

4. Click Save Script button.

5. Click Execute Script button.

6. You can also see the SCL and SDA waveforms using the Oscilloscope.

Requesting

Address Byte

5 Bytes

Note: At this point, the PICkit Serial transmits the I

C Read Command to the

MCP3424 device. The saved file name will appear in Users I2C Scripts

column, and can be re-used any time by selecting the file name.

Note: When you click on the “Execute Script” menu, the “Busy” LED on the

PICkit Serial Analyzer will momentarily turn on and then turn off. If the LED

remains ON, a communications problem has occurred. Remove the PICkit

Serial Analyzer from your computer and recheck the parameter values

including the order of parameters under the “Script Detail” column, and try

again until the “Busy” LED turns OFF immediately after sending the I

command.