Datasheet

MCP3424 Evaluation Board User’s Guide

Name menu.

3. Click Save Script button.

4. Click Execute Script button.

5. You can also see the SCL and SDA waveforms using the Oscilloscope.

FIGURE 1-4: I

C Write Command Waveforms for the MCP3424.

Note: At this point, the PICkit Serial transmits the I

C Write Command to the

MCP3424 device. The saved file name will appear in Users I2C Scripts

column, and can be re-used any time by selecting the file name.

Note: When you click on the “Execute Script” menu, the “Busy” LED on the PICkit

Serial Analyzer will momentarily turn on and then turn off. If the LED

remains ON, a communications problem has occurred. Remove the PICkit

Serial Analyzer from your computer and recheck the parameter values

including the order of parameters under the “Script Detail” column, and try

again until the “Busy” LED turns OFF immediately after sending the I

command.

Write Command with Address bits

Configuration Bits

Zoom-in