Datasheet

Quick Start Instructions

FIGURE 1-3: Script file example for I

C Write Command.

1.3.2.2 SAVE THE SCRIPT FILE AND PROGRAMMING THE MCP3424

CONFIGURATION REGISTER

1. Change the 2nd and 3rd data bytes you want in the Script Detail.

2. Type in any script name (i.e., MCP3424_Write) in the space below the Script

2 Bytes to send

Address Byte

Configuration Byte

(9C)

Note: The “9C” in the configuration byte selects the following options:

- Conversion Mode: Continuous Conversion

- Channel Selection: Channel 1

- Bit Resolution: 18 bits

- Gain Selection: 1x