Datasheet

MCP3424 Evaluation Board User’s Guide
DS51737A-page 8 © 2008 Microchip Technology Inc.
FIGURE 1-2: MCP3424 Evaluation Board with the PICkit Serial Analyzer.
1.3.1 PICkit Serial Analyzer PC Software Setup for the MCP3424
Evaluation Board
The following steps describe how to set up and use the PICkit Serial Analyzer PC
Graphic User Interface (GUI).
1. Install the PICkit Serial Analyzer software onto your personal computer (PC).
2. Connect the USB cable between the PICkit Serial Analyzer and the PC.
3. Run the PICkit Serial PC Software: It will open to the following GUI. Click the
Next button and follow the instructions.
PICkit Serial Analyzer
MCP3424 Evaluation Board
USB Cable
Personal
Computer
Connected between the
PICkit Serial Analyzer
and Personal Computer.
Sensor Input
Connectors