User manual

Quick Start Instructions

3. Type in any script name (i.e., MCP3422_Read) in the space below the Script

Name menu.

4. Click the Save Script button.

5. Click the Execute Script button.

6. You can also see the SCL and SDA waveforms using the oscilloscope.

Note: At this point, the PICkit Serial transmits the I

C Read Command to the

MCP3422 device. The saved file name will appear in the “Users I2C

Scripts” column, and can be re-used any time by selecting the file name.

Note: When you click on the Execute Script menu, the “Busy” LED on the PICkit

Serial Analyzer will momentarily turn on and then turn off. If the LED

remains ON, a communications problem has occurred. Remove the PICkit

Serial Analyzer from your computer and re-check the parameter values,

including the order of parameters under the “Script Detail” column, and try

again until the “Busy” LED turns OFF immediately after sending the I2C

command.