User manual

MCP3422 Evaluation Board for PICkit™ Serial User’s Guide
DS51781A-page 8 © 2008 Microchip Technology Inc.
1.3.1 PICkit Serial Analyzer PC Software Setup for the MCP3422
Evaluation Board
The following steps describe how to set up and use the PICkit Serial Analyzer PC
Graphic User Interface (GUI).
1. Install the PICkit Serial Analyzer software onto your personal computer (PC).
2. Connect the USB cable between the PICkit Serial Analyzer and the PC.
3. Run the PICkit Serial PC Software. The following graphic user interface (GUI) will
appear.
FIGURE 1-3: PICkit Serial Analyzer Configuration Wizard Welcome Window.
Click the Next button and follow the instructions.