Datasheet

 2002 Microchip Technology Inc. DS21291E-page73
MCP2510
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: [phone]
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
PART NO. X /XX
PackageTemp erature
Range
Device
Device: MCP2510: CAN Controller w/SPI Interface
MCP2510T: CAN Controller w/SPI Interface
(Tape and Reel)
Temperature Range: - = -40°C to +85°C
E = -40°C to +125°C
Package: P = Plastic DIP (300 mil Body), 18-Lead
SO = Plastic SOIC (300 mil Body), 18-Lead
ST = TSSOP, (4.4 mm Body), 20-Lead
Examples:
a) MCP2510-E/P: Extended temperature,
PDIP package.
b) MCP2510-I/P: Industrial temperature,
PDIP package.
c) MCP2510-E/SO: Extended temperature,
SOIC package.
d) MCP2510-I/SO: Industrial temperature,
SOIC package.
e) MCP2510-I/SO: Tape and Reel, Industrial
temperature, SOIC package.
f) MCP2510I/ST: Industrial temperature,
TSSOP package.
g) MCP2510T-I/ST: Tape and Reel, Industrial
temperature, TSSOP package.