Information
Explorer 16 Starter Kit (DV164037)
This kit is a complete set of tools for
application development supporting
Microchip’s PIC24 and dsPIC33 16-bit
and PIC32 32-bit microcontrollers. This kit
includes a MPLAB ICD 3 In-Circuit Debugger, an Explorer16
Development Board, a 9V universal power supply for use with
either the Explorer 16 board or the MPLAB ICD, a serial cable
and both a PIC24FJ128GA010 and a dsPIC33F256GP710
device (mounted on plug-in modules for quick replacement).
MPLAB Starter Kit for dsPIC DSCs (DM330011)
This starter kit introduces users to the
dsPIC Digital Signal Controller device
using its speech and audio processing
capabilities. The kit is USB-powered, has
on-board debug circuitry and 24-bit codec for high-quality
audio applications. Also on the board are reconfigurable
switches, potentiometers, a temperature sensor and a
4 Mb serial EEPROM to store data such as audio samples.
PIC32 Starter Kit (DM320001)
With over 35 source code examples to
the "Getting Started" project, this kit
includes everything needed to write,
program, debug and execute code on a
high-performance PIC32 microcontroller.
PIC32MX1/MX2 Starter Kit (DM320013)
The PIC32MX1/MX2 Starter kit is a
complete solution for exploring the low-
cost, high-performance PIC32MX1/MX2
devices. This kit is perfect for providing
an introduction to basic user interfaces with mTouch™
senging solutions buttons and high-quality audio.
PIC32 USB Starter Kit II (DM320003-2)
This kit provides the easiest and lowest cost
method to experience the USB and CAN
functionality of the PIC32 microcontrollers.
Users can develop CAN applications using
PIC32 expansion boards. The board contains
everything needed to develop USB embedded host/
device/OTG applications when combined with Microchip's
free USB software.
MPLAB Starter Kit for PIC24F Intelligent Integrated
Analog (DM240015)
The MPLAB Starter Kit for PIC24F Intelligent
Integrated Analog is a standalone board
showcasing the advantages of lower BOM
cost, faster throughput and lower noise
analog, and features an on-board programmer/debugger.
PICkit 3 Starter Kit (DV164130)
This Demo Kit contains one assembled
board with area for prototyping circuits.
The assembled board is populated
with the PIC16F1829-I/P. It also ships with a sample of
PIC18F14K22-I/P (20-pin) MCU.
on-board debug circuitry and 24-bit codec for high-quality
Getting Started
Starter Kits
Starter Kits are complete, affordable, turnkey solutions
consisting of hardware and software sufficient for exploring
specific applications or the features of the device family
they represent. Most kits include an on-board or separate
debugger and tutorials. To get started, simply install and
start MPLAB X IDE, connect the hardware and step through
the easy-to-follow tutorials.
F1 Evaluation Kit (DV164132)
The F1 Evaluation Kit is a demonstration/
development tool for Enhanced Mid-Range
PIC microcontrollers (PIC12F1XXX/
PIC16F1XXX) and includes the PICkit 3
for quick programming and development. Populated with a
PIC16LF1937 featuring XLP technology, this platform consists
of a 44-pin development board with prototyping space, 3V
LCD glass, support for the Motor Control add-on and support
for PICkit 3 and PICkit Serial Analyzer. This kit provides a
platform for general purpose development, and includes
demonstrations focusing on low power, LCD and motor control.
MPLAB Starter Kit for PIC18 MCU (DM180021)
This kit includes an on-board debugger/
programming capability as well as USB
communication, a capacitive touch pad,
potentiometer, acceleration sensor,
MicroSD™ memory card and an OLED display. The board
can function as a USB mouse, joystick or mass storage
device (thumb drive) all using the on-board capacitive
touch sense pads.
PIC18 Development Kit (DV164136)
This kit includes a PIC18 Explorer board,
PICkit 3 Debugger/Programmer, USB
cable and a 9V universal power supply.
The PIC18 Explorer board includes both
the PIC18F8722 and PIC18F87J11
microcontrollers and supports dozens of general purpose
PIC18 families using various processor Plug-in Modules
(PIMs). PICtail™ daughter boards enable many different
accessory boards to connect to the PIC18 Explorer.
MPLAB Starter Kit for PIC24H MCUs (DM240021)
The PIC24H Starter Kit is a complete
hardware and software kit for exploring
the power of PIC24H family of MCUs
including a built-in debugger on the
board. A tri-axial accelerometer is provided for acceleration
detection. The starter kit also showcases a low-cost audio
playback with an on-board speaker and an OLED display
running the Microchip Graphics library.
MPLAB Starter Kit for PIC24F MCUs (DM240011)
This kit includes an integrated in-circuit
debugger and programmer, USB device
and host connectors, tri color LED,
capacitive touch pad and an OLED
display. Menu driven demonstration software supports
data logging, thumb drive and graphics applications to test
the PIC24F MCU.
MicroSD™ memory card and an OLED display. The board
microcontrollers and supports dozens of general purpose
board. A tri-axial accelerometer is provided for acceleration
display. Menu driven demonstration software supports
Getting Started
6
Quick Guide to Microchip Development Tools