Information

dsPICDEM MCSM Development Board (DM330022)
This development board is intended for low-voltage (up to
80 volts at 3 amps) 2-phase uni-polar or bi-polar stepper
motor (4, 6 or 8 wire) applications. It provides a low-cost
system for users to evaluate and develop applications
using dsPIC33F motor control DSCs via a Plug-In Module
(PIM) or 28-pin SOIC socket. A USB serial interface for
RTDM is provided. Feedback support includes current
and voltage. Demo software to run motors in open-loop or
closed-loop with full or variable micro-stepping is provided.
A DMCI/RTDM GUI for controlling step commands, motor
parameter input and operation modes is included.
Buck/Boost Converter PICtail Plus Card
(AC164133)
A low-cost development platform for dsPIC33FGS SMPS
devices, the buck/boost converter PICtail Plus card has
two buck stage outputs and one boost stage output. This
board can be used with either the Explorer 16 board or the
16-bit 28-pin starter board and the dsPIC33FGS SMPS and
digital power conversion devices.
Security
KEELOQ® Security ICs 3 Development Kit (DM303008)
The low-cost KeeLoq Security ICs
3 Development Kit is designed to
help engineers get up to speed
quickly on PIC microcontrollers. The
kit provides everything you need to
program, debug and develop secure
authentication applications for a variety of markets such
as security systems (keypads, remote sensors, and
access control), remote keyless entry (automotive) and
authentication (identity and property) applications.
BodyCom™ Technology Development Kit
(DM160213)
The BodyCom Technology
Development Kit is designed to help
engineers get up to speed quickly
using this new technology. Utilizing
Microchip's PIC microcontrollers
and analog components, it provides everything needed
to program, debug and develop secure communication
systems for a variety of applications including access
control or passive keyless entry.
and analog components, it provides everything needed
Touch Sensing Technology
Enhanced mTouch Capacitive Touch Evaluation Kit
(DM183026-2)
The enhanced mTouch Capacitive
Touch Evaluation Kit provides a
simple platform for developing a
variety of capactive touch sense
applications using PIC16F, PIC24F and
PIC32 microcontrollers.
Metal Over Cap Accessory Kit (AC183026)
The Metal Over Cap Accessory
Kit contains two daughter boards
showcasing Metal Over Cap
technology. One board has a
stainless steel cover and the other board has a plastic
cover. This kit provides an easy way to evaluate Microchip's
unqiue technology when used in conjunction with the
mTouch Capacitive Touch Evaluation Kit (DM183026-2).
mTouch AR1000 Development Kit (DV102011)
This kit provides everything
designers need to get started using
AR1000 resistive controllers for
a turn-key, cost-effective solution.
The kit includes the AR1000
development board, a 7" four-wire
resistive touch screen, a PICkit Serial Analyzer and all
necessary interface cables, as well as a CD containing
technical documentation and all necessary software.
mTouch AR1100 Development Kit (DV102012)
The mTouch AR1100 Development
Kit provides everything designers
need to get started using AR1100
resistive controller for a turn-key,
cost-effective USB solution.
PIC32 GUI Development Board with Projected
Capacitive Touch (DM320015)
This board enables development of
cost-effective multi-touch graphical
user interfaces. It is based on the
PIC32MX795F512H and projected
capacitive touch controller, MTCH6301. The board
provides USB host and device connectivity and supports
I/O) connections via through-hole pads for custom board
attachment.
MGC3130 Single Zone Evaluation Kit "Sabrewing"
(DM160217)
A complete solution for exploring
the MCG3130 3D hand tracking and
gesture recognition controller based on
electrical near-field sensing. Features a
7" sensing electrode, USB interface and
the GestIC® Technology Colibri Suite.
Application-Specific Development Tools
11
Quick Guide to Microchip Development Tools