Information

USB
PIC32 I/O Expansion Board (DM320002)
This I/O expansion board provides PIC32
starter board (DM320001, DM320003)
users with full access to MCU signals,
JTAG debugging, ICSP development and
connection of PICtail Plus daughter cards.
PICDEM FS USB Demonstration Kit (DM163025-1)
The PICDEM FS USB Demonstration
Kit is designed as an easy-to-use
evaluation platform for Microchip's
PIC18F2X/4XK50 family of USB
MCUs. These devices support full-
speed USB communication without the need for an external
crystal, which allows significant cost savings and reduced
design effort. The demo kit provides all of the hardware
needed to demonstrate and develop a complete USB
communication solution. Additional software is available for
free at Microchip's online software libraries.
USB PICtail Plus Daughter Board (AC164131)
This daughter board enables USB connectivity when
using a PIC24 or PIC32 USB PIM in conjunction with the
Explorer 16 board.
USB2514B Hi-Speed USB 2.0 Multi-TT 4-Port Hub
with Battery Charging Support (EVB-USB2514BC)
USB2514B MultiTRAK™ Hub Controller
is a low-power, full-featured, OEM
configurable Hi-Speed USB 2.0
compliant hub with four downstream
ports. Each of these downstream ports
in the USB2514B device is capable of supporting battery
charging per the USB battery charging specification.
USB2640 USB 2.0 Port Hub with Ultra Fast Flash
Media Controller Evaluation Board (EVB-USB2640)
The USB2640 is an Ultra Fast USB
2.0 Hub, Flash media controller,
and protocol bridge combo. The
EVB-USB2640 Evaluation Board
demonstrates a stand-alone
application for developers of
applications such as Flash media card reader/writer,
printers, desktop and mobile PCs, consumer A/V, and flat
panel displays.
Wi-Fi
RN171 Wi-Fi Evaluation Kit (RN-171-EK)
The RN-171-EK is an 802.11 b/g Wi-Fi
evaluation kit for the RN171 module.
It can be used to quickly add Wi-Fi
connectivity to embedded applications.
It has the flexibility to connect directly
to a PC via a standard USB interface or to embedded
processors through the TTL/UART interface. The board
includes two convenient pushbuttons for controlling both
SoftAP and WPS mode without software configuration. The
status LEDs and jumpers enable rapid prototyping and
integration into existing systems.
Wi-Fi Comm Demo Board (DV102411)
The Wi-Fi Comm Demo board provides a
compact development platform for customers
to evaluate Microchip’s Wi-Fi product offerings.
The demo board comes with a PIC32 MCU as
well as an onboard MRF24WB0MA Wi-Fi module
which is FCC/IC/ETSI certified.
Wi-Fi G Demo Board (DV102412)
The Wi-Fi G Demo Board is a compact
demonstration platform for customers to
easily evaluate and configure the fully certified
MRF24WG0MA 802.11 b/g Wi-Fi module. The
demo board is a fully functional standalone
web server powered by two AAA batteries. It
comes with the MRF24WG0MA Wi-Fi module
connected to a PIC32 with TCP/IP stack pre-
configured to serve web pages and show SoftAP, Wi-Fi
Direct client, and WPS functions.
MiWi™ Wireless Networking Protocol to Wi-Fi
Wireless Demo Kit (DM182018)
The MiWi Wireless Networking
Protocol to Wi-Fi Wireless Demo
Kit allows developers to evaluate
and experiment with MiWi wireless
networking protocol to Wi-Fi gateway
solutions. The kit includes a wireless
evaluation board with both MiWi wireless networking
protocol and Wi-Fi transceivers. It also includes two MiWi
wireless networking protocol demo boards to create a
three node MiWi wireless networking protocol network.
The MiWi Wireless Networking Protocol to Wi-Fi Demo
Kit is pre-programmed with a wireless demo program,
which demonstrates how to commission and control the
MiWi wireless networking protocol P2P network from a
web browser.
Application-Specific Development Tools
12
Quick Guide to Microchip Development Tools