Datasheet

MCP2210
DS22288A-page 66  2011 Microchip Technology Inc.
4.2 AC Characteristics
4.2.1 TIMING PARAMETER SYMBOLOGY
The timing parameter symbols have been created in one of the following formats:
4.2.2 TIMING CONDITIONS
The operating temperature and voltage specified in
Table 4-3 apply to all timing specifications unless other-
wise noted. Figure 4-2 specifies the load conditions for
the timing specifications.
TABLE 4-3: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 4-2: LOAD CONDITIONS
FOR DEVICE TIMING
SPECIFICATIONS
1. TppS2ppS 2. TppS
T
F Frequency T Time
E Error
Lowercase letters (pp) and their meanings:
pp
io Input or Output pin osc Oscillator
rx Receive tx Transmit
bitclk RX/TX BITCLK RST Reset
drt Device Reset Timer
Uppercase letters and their meanings:
S
FFall PPeriod
HHigh RRise
I Invalid (high-impedance) V Valid
L Low Z High-impedance
AC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40C  T
A  +85C
Operating voltage V
DD range as described in DC spec,
Section 4.1 “DC Characteristics”.
50 pF (15 pF for OSC2)
Pin