Information

MCP2120/22 Developer’s Board User’s Guide
DS51842A-page 48 © 2009 Microchip Technology Inc.
FIGURE D-2: HyperTerminal
®
PROGRAM PROPERTIES
CONNECT TO WINDOW
This will open up the Port Settings window. The port settings should be configured as
shown in Figure D-3 with the “Bits per second” selected with 115200. After configuring
the port settings, select OK. The Figure D-2 window will be shown. Select the Settings
tab.
FIGURE D-3: HyperTerminal
®
PROGRAM PROPERTIES
CONFIGURATION WINDOW