Information

MCP2120/22 DEVELOPER’S BOARD
USER’S GUIDE
© 2009 Microchip Technology Inc. DS51842A-page 41
Appendix B. Bill Of Materials (BOM)
The MCP2120/22 Developer’s Board allows the MCP2120/22 device to be evaluated.
The board supports customers in the evaluation of three additional optical transceiver
devices. This is done with component layout of these additional optical transceiver
circuits. The customer would be required to install the desired circuit for testing.
Table B-1 shows the components that are installed in the MCP2120/22 Developer’s
Board PCB, while Table B-2 shows the components that are NOT installed on the
MCP2120/22 Developer’s Board PCB.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so the Bill Of Materials may
differ from those in this document. Please refer to our web site (www.microchip.com) to
obtain the latest documentation available.
TABLE B-1: BILL OF MATERIALS (BOM)
Qty Reference Description Manufacturer Part Number
2 C1,C2 CAP 1.0UF 16V CERAMIC X7R 0805 Kemet
®
Electronics
Corp.
C0805C105K4RACTU
9 C3, C11, C13,
C16, C17, C18,
C19, C20, C21
CAP .1UF 25V CERAMIC X7R 0805 Panasonic
®
- ECG ECJ-2VB1E104K
2 C8, C9 CAP CERAMIC 22PF 50V NP0 0805 Kemet Electronics
Corp.
C0805C220J5GACTU
2 C10, C12 CAPACITOR 4.7UF/10V TEH SER SMD Panasonic - ECG ECS-H1AX475R
1 C22 CAP 4.7UF 16V CERAMIC F 0805 Panasonic - ECG ECJ-2FF1C475Z
1 D1 LED GREEN CLEAR 0805 SMD LITE-ON
®
Semiconductor Corp.
LTST-C170KGKT
1 HD1 CONN HEADER .100 SINGL STR 12POS Sullins Connector
Solutions
PEC12SAAN
1 J1 CONN RECEPT MINI USB2.0 5POS Hirose Electronic Co.
Ltd
UX60-MB-5ST
1 J2 CONN HEADER .100 SINGL STR 6POS
(Note 2)
Sullins Connector
Solutions
PEC36SBAN
1 J3 CONN D-SUB RCPT R/A 9POS PCB AU Amphenol
Commercial Products
—
6 JMP1, JMP2,
JMP3, JMP4,
JMP5, JMP7
CONN HEADER 3POS .100" STR TIN Molex
®
/Waldom
®
Electronics Corp
90120-0123
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The
released BOM used in manufacturing uses all RoHS-compliant components.
2: This connector can be made by cutting a single .100 Single R/A 36POS into six pieces.