Datasheet

MCP2021/2/1P/2P

FIGURE 1-12: Voltage Regulator Output on Overcurrent Situation.

1.7 ICSP™ Considerations

The following should be considered when the

MCP2021/2/1P/2P is connected to pins supporting

in-circuit programming:

• Power used for programming the microcontroller

can be supplied from the programmer or from the

MCP2021/2/1P/2P.

• The voltage on V

REG should not exceed the

maximum output voltage of V

REG.

Note 1: I

REG less than 50 mA, regulator on.

2: After I

REG exceeds IREGmax, voltage regulator output will be reduced until VREG off is reached.

5.0

3.5

(1) (2)

IREG

VREG