Datasheet

 2013 Microchip Technology Inc. DS22331A-page 31
MCP19111
FIGURE 5-6: PWM TIMING
TABLE 5-5: PWM REQUIREMENTS
Param
No.
Sym Characteristic Min Typ† Max Units Conditions
53* TccR PWM (CLKPIN) output rise time — 10 25 ns
54* TccF PWM (CLKPIN) output fall time — 10 25 ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at V
IN
=12V (V
DD
= 5V), +25°C unless otherwise stated. Parameters are for design
guidance only and are not tested.
TABLE 5-6: MCP19111 A/D CONVERTER (ADC) CHARACTERISTICS:
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Sym Characteristic Min Typ
†
Max
Unit
s
Conditions
AD01 N
R
Resolution — — 10 bit
AD02 E
IL
Integral Error — — 1LSbAV
DD
=5.0V
AD03 E
DL
Differential Error — — 1 LSb No missing codes to 10 bits
AV
DD
=5.0V
AD04 E
OFF
Offset Error — +3.0 +5.0 LSb AV
DD
=5.0V
AD07 E
GN
Gain Error — 2 5LSbAV
DD
=5.0V
AD06
AD06A
V
REF
Reference Voltage
(3)
—AV
DD
—V
AD07 V
AIN
Full-Scale Range GND — AV
DD
V
AD08 Z
AIN
Recommended Impedance
of Analog Voltage Source
—— 10k
* These parameters are characterized but not tested.
† Data in ‘Typ’ column is at V
IN
= 12V (V
DD
= 5V), +25°C unless otherwise stated. These parameters are for
design guidance only and are not tested.
Note 1: Total Absolute Error includes integral, differential, offset and gain errors.
2: The A/D conversion result never decreases with an increase in the input voltage and has no missing
codes.
3: When ADC is off, it will not consume any current other than leakage current. The power-down current
specification includes any such leakage from the ADC module.
Note: Refer to Figure 5-1 for load conditions.
53 54
PWM (CLKPIN)