Datasheet

dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
DS70000652F-page 342 Preliminary  2011-2014 Microchip Technology Inc.
TABLE 27-7: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  T
A  +150°C for High Temperature
Parameter
No.
Typical
(1)
Max Doze Ratio Units Conditions
Doze Current (I
DOZE) – dsPIC33FJ16(GP/MC)10X Devices
DC74a 4.3 7.2 1:2 mA 3.3V 5 MIPS
DC74f 1.6 6.2 1:64 mA 3.3V 5 MIPS
DC74g 1.5 6.2 1:128 mA 3.3V 5 MIPS
Doze Current (I
DOZE) – dsPIC33FJ32(GP/MC)10X Devices
DC74a 4.7 7.2 1:2 mA 3.3V 5 MIPS
DC74f 1.9 6.2 1:64 mA 3.3V 5 MIPS
DC74g 1.4 6.2 1:128 mA 3.3V 5 MIPS
Note 1: Data in the Typical column is 3.3V unless otherwise stated.
TABLE 27-8: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +150°C for High Temperature
Param
No.
Symbol Characteristic
(1)
Min Typ Max Units Conditions
Program Flash Memory
HD130 E
P Cell Endurance 10,000 — — E/W -40C to +150C
(2)
HD134 TRETD Characteristic Retention 20 — — Year 1000 E/W cycles or less and no
other specifications are violated
Note 1: These parameters are assured by design, but are not characterized or tested in manufacturing.
2: Programming of the Flash memory is allowed up to +150°C.
TABLE 27-9: AC CHARACTERISTICS: INTERNAL FAST RC (FRC) ACCURACY
AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Param
No.
Characteristic Min Typ Max Units Conditions
Internal FRC Accuracy @ 7.37 MHz
(1)
F20d FRC -8 ±0.25 +8 % -40°C  TA +150°C VDD 3.0-3.6V
Note 1: Frequency is calibrated at +25°C and 3.3V. TUNx bits may be used to compensate for temperature drift.
TABLE 27-10: INTERNAL LOW-POWER RC (LPRC) ACCURACY
AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Param
No.
Characteristic Min Typ Max Units Conditions
LPRC @ 32.768 kHz
(1,2)
F21c LPRC -40 ±10 +40 % -40°C  TA +150°C VDD 3.0-3.6V
Note 1: Change of LPRC frequency as VDD changes.
2: LPRC accuracy impacts the Watchdog Timer Time-out Period (TWDT1). See Section 23.4 “Watchdog
Timer (WDT)” for more information.