Datasheet

 2009-2014 Microchip Technology Inc. DS70000591F-page 393
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
FIGURE 27-9: HIGH-SPEED PWMx MODULE FAULT TIMING CHARACTERISTICS
FIGURE 27-10: HIGH-SPEED PWMx MODULE TIMING CHARACTERISTICS
FLTx
PWMx
MP20
MP30
PWMx
MP11
MP10
Note: Refer to Figure 27-1 for load conditions.
TABLE 27-29: HIGH-SPEED PWMx MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ Max Units Conditions
MP10 T
FPWM PWMx Output Fall Time — 2.5 — ns
MP11 TRPWM PWMx Output Rise Time — 2.5 — ns
MP20 TFD Fault Input  to PWMx
I/O Change
— — 15 ns DTC<1:0> = 10
MP30 T
FH Minimum PWMx Fault Pulse
Width
8——ns
MP31 T
PDLY Tap Delay 1.04 — — ns ACLK = 120 MHz
MP32 A
CLK PWMx Input Clock — — 120 MHz See Note 2
Note 1: These parameters are characterized but not tested in manufacturing.
2: This parameter is a maximum allowed input clock for the PWM module.