Datasheet

 2009-2014 Microchip Technology Inc. DS70000591F-page 381
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
TABLE 27-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
TABLE 27-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Program Flash Memory
D130 E
P Cell Endurance 10,000 — — E/W -40C to +125C
D131 V
PR VDD for Read VMIN —3.6VVMIN = Minimum operating
voltage
D132B V
PEW VDD for Self-Timed Write VMIN —3.6VVMIN = Minimum operating
voltage
D134 T
RETD Characteristic Retention 20 — — Year Provided no other specifications
are violated, -40C to +125C
D135 I
DDP Supply Current during
Programming
—10 —mA
D136a T
RW Row Write Time 1.488 — 1.518 ms TRW = 11064 FRC cycles,
T
A = +85°C (See Note 2)
D136b T
RW Row Write Time 1.473 — 1.533 ms TRW = 11064 FRC cycles,
T
A = +125°C (See Note 2)
D137a TPE Page Erase Time 22.7 — 23.1 ms TPE = 168517 FRC cycles,
T
A = +85°C (See Note 2)
D137b TPE Page Erase Time 22.4 — 23.3 ms TPE = 168517 FRC cycles,
T
A = +125°C (See Note 2)
D138a T
WW Word Write Cycle Time 47.7 — 48.7 µs TWW = 355 FRC cycles,
T
A = +85°C (See Note 2)
D138b TWW Word Write Cycle Time 47.3 — 49.2 µs TWW = 355 FRC cycles,
T
A = +125°C (See Note 2)
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min.), TUN<5:0> = b'100000 (for Max.).
This parameter depends on the FRC accuracy (see Table 27-20) and the value of the FRC Oscillator
Tuning register (see Register 9-4). For complete details on calculating the minimum and maximum time,
see Section 5.3 “Programming Operations”.
Operating Conditions: -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristics Min Typ Max Units Comments
—C
EFC External Filter Capacitor
Value
(1)
22 — — µF Capacitor must be low
series resistance
(< 0.5 Ohms)
Note 1: Typical V
CAP voltage = 2.5 volts when VDD  VDDMIN.