Datasheet

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DS70000591F-page 376  2009-2014 Microchip Technology Inc.
TABLE 27-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter No. Typical
(1)
Max
Doze
Ratio
Units Conditions
Doze Current (I
DOZE)
(2)
DC73a 45 60 1:2 mA
-40°C 3.3V 40 MIPSDC73f 40 60 1:64 mA
DC73g 40 60 1:128 mA
DC70a 43 60 1:2 mA
+25°C 3.3V 40 MIPSDC70f 38 60 1:64 mA
DC70g 38 60 1:128 mA
DC71a 42 60 1:2 mA
+85°C 3.3V 40 MIPSDC71f 37 60 1:64 mA
DC71g 37 60 1:128 mA
DC72a 41 60 1:2 mA
+125°C 3.3V 40 MIPSDC72f 36 60 1:64 mA
DC72g 36 60 1:128 mA
Note 1: Data in the Typical column is at 3.3V, +25°C unless otherwise stated.
2: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock is active, OSC1 is driven with external square
wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to VSS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are
all ‘0’s)
• CPU executing while(1) statement
• JTAG disabled