Datasheet

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DS70000591F-page 122  2009-2014 Microchip Technology Inc.
6.9 Using the RCON Status Bits
The user application can read the Reset Control
(RCON) register after any device Reset to determine
the cause of the Reset.
Table 6-3 provides a summary of the Reset flag bit
operation.
TABLE 6-3: RESET FLAG BIT OPERATION
Note: The status bits in the RCON register
should be cleared after they are read so
that the next RCON register value after a
device Reset will be meaningful.
Flag Bit Set by: Cleared by:
TRAPR (RCON<15>) Trap Conflict Event POR, BOR
IOPWR (RCON<14>) Illegal Opcode or Uninitialized W register
Access or Security Reset
POR, BOR
EXTR (RCON<7>) MCLR
Reset POR
SWR (RCON<6>) RESET Instruction POR, BOR
WDTO (RCON<4>) WDT Time-out PWRSAV Instruction, CLRWDT Instruction,
POR, BOR
SLEEP (RCON<3>) PWRSAV #SLEEP Instruction POR, BOR
IDLE (RCON<2>) PWRSAV #IDLE Instruction POR, BOR
BOR (RCON<1>) POR, BOR —
POR (RCON<0>) POR —
Note: All Reset flag bits can be set or cleared by user software.