Datasheet

 2009-2014 Microchip Technology Inc. DS7000591F-page 1
dsPIC33FJ32GS406/606/608/610 and
dsPIC33FJ64GS406/606/608/610
Operating Conditions
• 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Core: 16-Bit dsPIC33F
• Code-Efficient (C and Assembly) Architecture
• Two 40-Bit Wide Accumulators
• Single-Cycle (MAC/MPY) with Dual Data Fetch
• Single-Cycle Mixed-Sign MUL plus Hardware Divide
• 32-Bit Multiply Support
Clock Management
• ±1% Internal Oscillator
• Programmable PLLs and Oscillator Clock Sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast Wake-up and Start-up
Power Management
• Low-Power Management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.7 mA/MHz Dynamic Current (typical)
•50 µA I
PD Current (typical)
High-Speed PWM
• Up to 9 PWM Pairs with Independent Timing
• Dead Time for Rising and Falling Edges
• 1.04 ns PWM Resolution
• PWM Support for:
- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM
• Programmable Fault Inputs
• Flexible Trigger Configurations for ADC Conversions
Advanced Analog Features
• High-Speed ADC module:
- 10-bit resolution with up to two Successive
Approximation Register (SAR) converters
(up to 4 Msps)
- Up to 24 input channels grouped into
12 conversion pairs plus two voltage reference
monitoring inputs
- Dedicated result buffer for each analog channel
• Flexible and Independent ADC Trigger Sources
• Up to 4 High-Speed Comparators with Direct
Connection to the PWM module:
- 10-bit Digital-to-Analog Converter (DAC) for each
comparator
- DAC reference output
- Programmable references with 1024 voltage points
Timers/Output Compare/Input Capture
• Six General Purpose Timers:
- Five 16-bit and up to two 32-bit timers/counters
• Four Output Compare (OC) modules Configurable as
Timers/Counters
• Quadrature Encoder Interface (QEI) module
Configurable as Timer/Counter
• Four Input Capture (IC) modules
Communication Interfaces
• Two UART modules (12.5 Mbps):
- With support for LIN/J2602 2.0 protocols and IrDA
®
• Two 4-Wire SPI modules (15 Mbps)
• ECAN™ module (1 Mbaud) with ECAN 2.0B Support
•Two I
2
C™ modules (up to 1 Mbaud) with SMBus
Support
Direct Memory Access (DMA)
• 4-Channel DMA with User-Selectable Priority
Arbitration
• UART, SPI, ECAN, IC, OC and Timers
Input/Output
• Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or
6 mA on 66 Pins
• 5V Tolerant Pins
• Selectable Open-Drain and Pull-ups
• 29 External Interrupts
Qualification and Class B Support
• AEC-Q100 REVG (Grade 1, -40ºC to +125ºC)
• Class B Safety Library, IEC 60730, VDE Certified
Debugger Development Support
• In-Circuit and In-Application Programming
• Two Program and Two Complex Data Breakpoints
• IEEE 1149.2 Compatible (JTAG) Boundary Scan
• Trace and Run-Time Watch
16-Bit Digital Signal Controllers with High-Speed PWM,
ADC and Comparators