Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70000318G-page 304  2008-2014 Microchip Technology Inc.
FIGURE 24-3: I/O TIMING CHARACTERISTICS
Note: Refer to Figure 24-1 for load conditions.
I/O Pin
(Input)
I/O Pin
(Output)
DI35
Old Value
New Value
DI40
DO31
DO32
TABLE 24-21: I/O TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
DO31 T
IOR Port Output Rise Time:
4x Source Driver Pins – RA0-RA2,
RB0-RB2, RB5-RB10, RB15, RC1,
RC2, RC9, RC10
—1025nsRefer to Figure 24-1
for test conditions
8x Source Driver Pins – RC0,
RC3-RC8, RC11-RC13
— 8 20 ns
16x Source Driver Pins – RA3,
RA4, RB3, RB4, RB11-RB14
— 6 15 ns
DO32 TIOF Port Output Fall Time:
4x Source Driver Pins – RA0-RA2,
RB0-RB2, RB5-RB10, RB15, RC1,
RC2, RC9, RC10
—1025ns
Refer to Figure 24-1
for test conditions
8x Source Driver Pins – RC0,
RC3-RC8, RC11-RC13
— 8 20 ns
16x Source Driver Pins – RA3,
RA4, RB3, RB4, RB11-RB14
— 6 15 ns
DI35 T
INP INTx Pin High or Low Time (input) 20 — — ns
DI40 TRBP CNx High or Low Time (input) 2 — — TCY
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.