Datasheet

 2008-2014 Microchip Technology Inc. DS70000318G-page 299
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
TABLE 24-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Program Flash Memory
D130 E
P Cell Endurance 10,000 — — E/W -40C to +125C
D131 V
PR VDD for Read VMIN —3.6VVMIN = Minimum operating
voltage
D132B V
PEW VDD for Self-Timed Write VMIN —3.6VVMIN = Minimum operating
voltage
D134 T
RETD Characteristic Retention 20 — — Year Provided no other specifications
are violated, -40C to +125C
D135 I
DDP Supply Current during
Programming
—10—mA
D136a T
RW Row Write Time 1.477 — 1.538 ms TRW = 11064 FRC cycles,
T
A = +85°C, See Note 2
D136b TRW Row Write Time 1.435 — 1.586 ms TRW = 11064 FRC cycles,
T
A = +125°C, See Note 2
D137a T
PE Page Erase Time 22.5 — 23.4 ms TPE = 168517 FRC cycles,
T
A = +85°C, See Note 2
D137b TPE Page Erase Time 21.9 — 24.2 ms TPE = 168517 FRC cycles,
T
A = +125°C, See Note 2
D138a TWW Word Write Cycle Time 47.4 — 49.3 µs TWW = 355 FRC cycles,
T
A = +85°C, See Note 2
D138b T
WW Word Write Cycle Time 46 — 50.9 µs TWW = 355 FRC cycles,
T
A = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max).
This parameter depends on the FRC accuracy (see Table 24-20) and the value of the FRC Oscillator Tun-
ing register (see Register 9-4). For complete details on calculating the Minimum and Maximum time see
Section 5.3 “Programming Operations”.
Operating Conditions: -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristics Min Typ Max Units Comments
—C
EFC External Filter Capacitor
Value
(1)
4.7 10 — F Capacitor must be low
series resistance
(< 5 ohms)
Note 1: Typical V
CAP voltage = 2.5 volts when VDD  VDDMIN.