Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70000318G-page 292  2008-2014 Microchip Technology Inc.
TABLE 24-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE): Core Off Clock On Base Current
(2)
DC40d 48 — mA -40°C
3.3V 10 MIPS
DC40a 48 — mA +25°C
DC40b 48 — mA +85°C
DC40c 48 — mA +125°C
DC41d 60 — mA -40°C
3.3V 16 MIPS
(3)
DC41a 60 mA +25°C—
DC41b 60 — mA +85°C
DC41c 60 — mA +125°C
DC42d 68 — mA -40°C
3.3V 20 MIPS
(3)
DC42a 68 — mA +25°C
DC42b 68 — mA +85°C
DC42c 68 — mA +125°C
DC43d 77 — mA -40°C
3.3V 30 MIPS
(3)
DC43a 77 — mA +25°C
DC43b 77 — mA +85°C
DC43c 77 — mA +125°C
DC44d 86 — mA -40°C
3.3V 40 MIPS
DC44a 86 — mA +25°C
DC44b 86 — mA +85°C
DC44c 86 — mA +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: Base Idle current (I
IDLE) is measured as follows:
• CPU core is off, oscillator is configured in EC mode and external clock is active, OSC1 is driven with
external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits
are zeroed)
• JTAG is disabled
3: These parameters are characterized but not tested in manufacturing.