Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70000318G-page 246  2008-2014 Microchip Technology Inc.
19.4 ADC Control Registers
The ADC module uses the following control and status
registers:
• ADCON: Analog-to-Digital Control Register
• ADSTAT: Analog-to-Digital Status Register
• ADBASE: Analog-to-Digital Base Register(1,2)
• ADPCFG: Analog-to-Digital Port Configuration
Register
• ADCPC0: Analog-to-Digital Convert Pair Control
Register 0
• ADCPC1: Analog-to-Digital Convert Pair Control
Register 1
• ADCPC2: Analog-to-Digital Convert Pair Control
Register 2(1)
• ADCPC3: Analog-to-Digital Convert Pair Control
Register 3(1)
The ADCON register controls the operation of the
ADC module. The ADSTAT register displays the
status of the conversion processes. The ADPCFG
registers configure the port pins as analog inputs or
as digital I/O. The ADCPCx registers control the
triggering of the ADC conversions. See Register 19-1
through Register 19-8 for detailed bit configurations.
Note: A unique feature of the ADC module is its
ability to sample inputs in an asynchronous
manner. Individual Sample-and-Hold
circuits can be triggered independently of
each other.