Datasheet

dsPIC33F
DS70165E-page 312 Preliminary © 2007 Microchip Technology Inc.
TABLE 26-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE): Core OFF Clock ON Base Current
(2)
DC40a TBD — mA +25°C
3.3V
10 MIPS
DC40b TBD — mA +85°C
DC41a TBD — mA +25°C
3.3V 16 MIPS
DC41b TBD — mA +85°C
DC42a TBD — mA +25°C
3.3V 20 MIPS
DC42b TBD — mA +85°C
DC43a TBD — mA +25°C
3.3V 30 MIPS
DC43b TBD — mA +85°C
DC44a 16.5 — mA +25°C
3.3V 40 MIPS
DC44b 16 — mA +85°C
Legend: TBD = To Be Determined
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Base I
IDLE current is measured with core off, clock on and all modules turned off. Peripheral Module
Disable SFR registers are zeroed. All I/O pins are configured as inputs and pulled to V
SS.
TABLE 26-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD)
(2)
DC60a 200 — μA+25°C
3.3V Base Power-Down Current
(3,4)
DC60b TBD — μA+85°C
DC61a TBD — μA+25°C
3.3V Watchdog Timer Current: ΔI
WDT
(3)
DC61b TBD — μA+85°C
Legend: TBD = To Be Determined
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled to V
SS. WDT, etc., are all switched off.
3: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
4: These currents are measured on the device containing the most memory in this family.