Datasheet

dsPIC30F
DS70043F-page 62 © 2005 Microchip Technology Inc.
FIGURE 13-4: dsPIC30F MOTOR
CONTROL DEVELOPMENT
SYSTEM
The motor control development system is shipped with
a 9V power supply for the control board, RS-232 I/O
cable, pre-programmed dsPIC30F device, example
software and documentation that allows you to
exercise the development board demo programs. A list
of motors that are compatible with the development
system is also provided to facilitate rapid evaluation.
13.5 dsPICDEM.net™ Connectivity
Development Board
The dsPICDEM.net Connectivity Development Board
provides you with a basic platform for developing and
evaluating various connectivity solutions, implementing
TCP/IP protocol layers, combined with V.32/V.32bis
and V.22/V.22bis ITU-T specifications over PSTN or
Ethernet communication channels.
Some key features and attributes of the dsPICDEM.net
development board are:
• Supports dsPIC30F6014A device
• 10-Base T Ethernet support
• PSTN interface with DAA/AFE
• RS-232 and RS-485 communication channels
• In-Circuit Debugger interface (MPLAB ICD 2)
• ICE 4000 Emulator interface
• Microchip temperature sensor
• Microchip Dual Channel Digital Potentiometer
•2x16 LCD
• General purpose prototyping area
• Various LEDs, switches and potentiometers
• External 64K x 16 SRAM
• External EE memory for storing HTML pages
• Expansion header for user applications
The connectivity development board is shipped with a
9V power supply, RS-232 I/O cable, pre-programmed
dsPIC30F devices with example connectivity software
and appropriate documentation to enable you to
exercise the development board connectivity demo
program.
FIGURE 13-5: dsPICDEM.net™
CONNECTIVITY
DEVELOPMENT BOARD
13.6 Plug-in Modules
The various dsPIC30F development boards may use
the plug-in modules for the dsPIC30F silicon devices.
Since the boards support the ICE 4000 Emulator
Device Adapter through the use of header pins on the
PCB, they also are used to provide flexibility for the
replacement of the dsPIC30F silicon. There are
presently two different plug-in sample types that
support the 80-pin TQFP package types, for general
purpose (dsPIC30F6014A) and motor control
dsPIC30F6010A samples. The use of plug-in samples
is considered to be an interim development board
mechanization.