Datasheet

±15kV ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR
®
Technology in a Small Footprint
Datasheet
SMSC LAN8700/LAN8700i 43 Revision 2.3 (04-12-11)
DATASHEET
1.4 Remote Fault 1 = remote fault condition detected
0 = no remote fault
RO/
LH
0
1.3 Auto-Negotiate
Ability
1 = able to perform auto-negotiation function
0 = unable to perform auto-negotiation function
RO 1
1.2 Link Status 1 = link is up,
0 = link is down
RO/
LL
X
1.1 Jabber Detect 1 = jabber condition detected
0 = no jabber condition detected
RO/
LH
X
1.0 Extended
Capabilities
1 = supports extended capabilities registers
0 = does not support extended capabilities registers
RO 1
Table 5.32 Register 2 - PHY Identifier 1
ADDRESS NAME DESCRIPTION MODE DEFAULT
2.15:0 PHY ID Number Assigned to the 3rd through 18th bits of the
Organizationally Unique Identifier (OUI), respectively.
OUI=00800Fh
RW 0007h
Table 5.33 Register 3 - PHY Identifier 2
ADDRESS NAME DESCRIPTION MODE DEFAULT
3.15:10 PHY ID Number Assigned to the 19
th
through 24
th
bits of the OUI. RW C0h
3.9:4 Model Number Six-bit manufacturer’s model number. RW 0Ch
3.3:0 Revision Number Four-bit manufacturer’s revision number. RW 4h
Table 5.34 Register 4 - Auto Negotiation Advertisement
ADDRESS NAME DESCRIPTION MODE DEFAULT
4.15 Next Page 1 = next page capable,
0 = no next page ability
This Phy does not support next page ability.
RO 0
4.14 Reserved RO 0
4.13 Remote Fault 1 = remote fault detected,
0 = no remote fault
RW 0
4.12 Reserved
4.11:10 Pause Operation 00 = No PAUSE
01 = Symmetric PAUSE
10 = Asymmetric PAUSE toward link partner
11 = Both Symmetric PAUSE and Asymmetric
PAUSE toward local device
R/W 00
Table 5.31 Register 1 - Basic Status (continued)
ADDRESS NAME DESCRIPTION MODE DEFAULT