Datasheet

Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller
Datasheet
SMSC LAN7500/LAN7500i 7 Revision 1.0 (11-01-10)
DATASHEET
Chapter 1 Introduction
1.1 Block Diagram
1.1.1 Overview
The LAN7500/LAN7500i is a high performance Hi-Speed USB 2.0 to 10/100/1000 Ethernet controller.
With applications ranging from embedded systems, set-top boxes, and PVR’s, to USB port replicators,
USB to Ethernet dongles, and test instrumentation, the device is a high performance and cost
competitive USB to Ethernet connectivity solution.
The LAN7500/LAN7500i contains an integrated 10/100/1000 Ethernet MAC and PHY, Filtering Engine,
USB PHY, Hi-Speed USB 2.0 device controller, TAP controller, EEPROM controller, and a FIFO
controller with a total of 32 KB of internal packet buffering.
The internal USB 2.0 device controller and USB PHY are compliant with the USB 2.0 Hi-Speed
standard. The device implements Control, Interrupt, Bulk-in, and Bulk-out USB Endpoints.
The Ethernet controller supports auto-negotiation, auto-polarity correction, HP Auto-MDIX, and is
compliant with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab standards. ARP and NS offload is also
supported.
Multiple power management features are provided, including various low power modes and "Magic
Packet", "Wake On LAN", and "Link Status Change" wake events. These wake events can be
programmed to initiate a USB remote wakeup.
An internal EEPROM controller exists to load various USB configuration information and the device
MAC address. The integrated IEEE 1149.1 compliant TAP controller provides boundary scan via JTAG.
Figure 1.1 LAN7500/LAN7500i System Diagram
TAP
Controller
EEPROM
Controller
USB 2.0
Device
Controller
SRAM
Ethernet
PHY
10/100/
1000
Ethernet
MAC
FIFO
Controller
USB
PHY
LAN7500/LAN7500i
Ethernet
EEPROM
JTAG
USB
Receive
Filtering
Engine