Datasheet

PIC32MX330/350/370/430/450/470
DS60001185C-page 292  2012-2013 Microchip Technology Inc.
FIGURE 30-8: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
TABLE 30-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
FIGURE 30-9: OCx/PWM MODULE TIMING CHARACTERISTICS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial 
-40°C  TA  +105°C for V-temp
Param.
No.
Symbol Characteristics
(1)
Min. Typical
(2)
Max. Units Conditions
OC10 TCCF OCx Output Fall Time — — — ns See parameter DO32
OC11 TCCR OCx Output Rise Time — — — ns See parameter DO31
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
OCx
OC11
OC10
(Output Compare
Note: Refer to Figure 30-1 for load conditions.
or PWM mode)
OCFA/OCFB
OCx
OC20
OC15
Note: Refer to Figure 30-1 for load conditions.
OCx is tri-stated
TABLE 30-27: SIMPLE OCx/PWM MODE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial 
-40°C  TA  +105°C for V-temp
Param
No.
Symbol Characteristics
(1)
Min Typical
(2)
Max Units Conditions
OC15 TFD Fault Input to PWM I/O Change — — 50 ns —
OC20 TFLT Fault Input Pulse Width 50 — — ns —
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.