Datasheet

 2012-2013 Microchip Technology Inc. DS60001185C-page 13
PIC32MX330/350/370/430/450/470
TABLE 3: PIN NAMES: PIC32MX4XXL DEVICES
(1,2,3,4)
Package
Bump #
Full Pin Name
Package
Bump #
Full Pin Name
A1 No Connect
A52
AN24/RPD1/RD1
A2 RG15 A53 AN26/RPD3/RD3
A3 V
SS
A54
PMD13/RD13
A4 AN23/PMD6/RE6
A55 RPD5/PMRD/RD5
A5 RPC1/RC1
A56
PMD15/RD7
A6 RPC3/RC3 A57 No Connect
A7 AN16/C1IND/RPG6/SCK2/PMA5/RG6
A58
No Connect
A8 AN18/C2IND/RPG8/PMA3/RG8 A59 V
DD
A9 AN19/C2INC/RPG9/PMA2/RG9 A60 RPF1/PMD10/RF1
A10 V
DD A61 RPG0/PMD8/RG0
A11 RPE8/RE8 A62 TRD3/CTED8/RA7
A12 AN5/C1INA/RPB5/V
BUSON/RB5 A63 VSS
A13 PGED3/AN3/C2INA/RPB3/RB3 A64 PMD1/RE1
A14 V
DD A65 TRD1/RG12
A15 PGEC1/AN1/RPB1/CTED12/RB1 A66 AN20/PMD2/RE2
A16 No Connect A67 AN21/PMD4/RE4
A17 No Connect A68 No Connect
A18 No Connect
B1
V
DD
A19 No Connect B2 AN22/RPE5/PMD5/RE5
A20 PGEC2/AN6/RPB6/RB6
B3
AN27/PMD7/RE7
A21 V
REF-/CVREF-/PMA7/RA9 B4 RPC2/RC2
A22 AV
DD
B5
RPC4/CTED7/RC4
A23 AN8/RPB8/CTED10/RB8 B6 AN17/C1INC/RPG7/PMA4/RG7
A24 CV
REFOUT/AN10/RPB10/CTED11/PMA13/RB10
B7 MCLR
A25 VSS B8 VSS
A26 TCK/CTED2/RA1 B9 TMS/CTED1/RA0
A27 RPF12/RF12 B10 RPE9/RE9
A28 AN13/PMA10/RB13 B11 AN4/C1INB/RB4
A29 AN15/RPB15/OCFB/CTED6/PMA0/RB15 B12 V
SS
A30 VDD B13 PGEC3/AN2/C2INB/RPB2/CTED13/RB2
A31 RPD15/RD15 B14 PGED1/AN0/RPB0/RB0
A32 RPF5/PMA8/RF5 B15 No Connect
A33 No Connect B16 PGED2/AN7/RPB7/CTED3/RB7
A34 No Connect B17 V
REF+/CVREF+/PMA6/RA10
A35 USBID/RPF3/RF3 B18 AVSS
A36 RPF2/RF2 B19 AN9/RPB9/CTED4/RB9
A37 VBUS B20 AN11/PMA12/RB11
A38 D- B21 V
DD
A39 SCL2/RA2 B22 RPF13/RF13
A40 TDI/CTED9/RA4 B23 AN12/PMA11/RB12
A41 V
DD B24 AN14/RPB14/CTED5/PMA1/RB14
A42 OSC2/CLKO/RC15 B25 V
SS
A43 VSS B26 RPD14/RD14
A44 SDA1/RPA15/RA15 B27 RPF4/PMA9/RF4
A45 RPD9/RD9 B28 No Connect
A46 RPD11/PMCS1/RD11 B29 RPF8/RF8
A47 SOSCI/RPC13/RC13 B30 V
USB 3 V 3
A48 VDD B31 D+
A49 No Connect
B32 SDA2/RA3
A50 No Connect
B33 TDO/RA5
A51 No Connect B34 OSC1/CLKI/RC12
Note 1: The RPn pins can be used by remappable peripherals. See Table 1 for the available peripherals and Section 12.3 “Peripheral Pin
Select” for restrictions.
2: Every I/O port pin (RAx-RGx), with the exception of RF6, can be used as a change notification pin (CNAx-CNGx). See Section 12.0 “I/O
Ports” for more information.
3: RPF3 (bump A35) is only available for input mapping and only when USBID is not used.
4: Shaded package bumps are 5V tolerant.