Information

nanoWatt XLP eXtreme Low Power
Products with Microchip’s nanoWatt XLP Technology offer
the industry’s lowest Sleep and Active currents, adding
years to the life of today’s low power and battery operated
applications.
What’s New!
■ High performance PIC24E core at 70MIPS with
enhanced and new peripherals
■ nanoWatt XLP technology with Sleep currents as low as
20nA and Active currents as low as 150 μA/HMz
■ Vbat battery back-up for RTCC
■ USB-OTG peripheral available on 28 to 100-pin products
■ PIC24H high-temperature (150ºC) products
■ Integrated on-chip Op Amps for high speed signal
amplification
■ Graphics controller with graphics acceleration and color
look-up table to drive a color display
■ LCD controller capable of driving up to 480 segments
Broad and Scalable Portfolio
■ Three 16-bit PIC24 families
• PIC24F, low power, 16 MIPS, mid-range performance
• PIC24H, high performance 16-bit MCU at 40MIPS
• PIC24E, highest performance 16-bit MCU at 70MIPS
■ 4 to 512 Kbytes of Flash program memory
■ 0.5 to 96 Kbytes of RAM
■ 14 to 144-pin package options
Real-Time Embedded Control
The PIC24 architecture was designed to meet the
demanding needs of real-time control.
■ Fast response to real-time events
• Quick interrupt response, only 5 cycles
■ Single-cycle bit manipulation
■ Single-cycle instruction execution
■ Single-cycle hardware multiply
■ Optimized architecture for C Code
System Robustness and
Management Features
■ Flexible high-speed and low-power integrated oscillators
with PLL eliminates need for external crystal
■ Power-on Reset and fail-safe clock monitor
■ nanoWatt XLP technology power management
■ On-chip Low-Dropout Voltage Regulator (LDO)
The top challenges facing today’s embedded system designer are attaining product
specification and performance goals, achieving on-time market launch and meeting cost goals.
Microchip’s PIC24 16-bit Microcontroller Families deliver the performance, peripherals,
software and hardware development tools and production support to reach these objectives.
Peripherals, Memory and Analog
PIC24 Block Diagram
Peripheral Pin Select
16/40/70 MIPS 16-bit Core
Memory Bus
M
IP
S
S
16
16
-bi
t
17 x 17
MPY
JTAG & Emul.
Interface
Register File
16 x 16
Barrel
Shifter
Address
Generation
16-bit ALU
Interrupt
Control
Memory Bus
Peripheral Bus
4-512 KB
Flash
Me
Me
m
mo
r
y
4-96 KB
RAM
DMA
Bu
s
0-512B
EEPROM
LCD
Segment
Drive
Integrated Graphics
Display Controller
Color Lookup Table
Graphics
Acceleration Units
USB On-the-Go
CTMU
Op Amp/Analog Comp., 0-3
Watchdog & PWR Mgmt.
16/32-bit Timers
Input Capture
Out Comp./PWM
UART, 2-4
SPI, 2-4 I
2
C™, 2-3
PMP
CRC
RTCC
DSBOR
DSWDT
INT0
Deep Sleep
V BAT
ADC - 2, 10/12-bit, 32 ch.
PMP
32-bit CRC, GP I/O
CAN, 0-2
ADC 10-bit, 16 ch.
PIC24 Microcontroller Family