User manual

PICDEM™ PIC18 Explorer Demonstration Board User’s Guide

To program the PIC18LF2450 for RS-232 UART communication:

1. Launch the MPLAB IDE application and select Configure>Select

Device>18F2450.

2. To start the programmer, select Programmer>Select Programmer>ICD2

3. To open the Hex code file, select File>Import>Open

and select

CD/Hex/RS232_USB_18F2450/Demo2450.hex.

4. Connect the J4 jumper to USB, as shown in Figure 2-8.

FIGURE 2-8: J4 JUMPER AND ‘USB’ SETTING

J4 Jumper

Jumper Location Jumper Setting

USB

Main