Datasheet
Table Of Contents
- TABLE 1: Silicon DEVREV Values
- TABLE 2: Silicon Issue Summary
- Silicon Errata Issues
- Data Sheet Clarifications
- 1. Module: Table 27-1: Memory Programming Requirements
- 2. Module: Table 27-2: Comparator Specifications
- 3. Module: Table 27-4: Internal Voltage Regulator Specifications
- 4. Module: Section 27.3 “DC Characteristics: PIC18F87J11 Family (Industrial)”
- 5. Module: Example 6-2: Erasing a Flash Program Memory Row
- 6. Module: Section 19.3 “SPI Mode” and Section 19.4 “I2C™ Mode”
- 7. Module: Figure 19-10: I2C™ Slave Mode Timing (Transmission, 7-Bit Address)
- 8. Module: Figure 19-24: I2C™ Master Mode Waveform (Reception, 7-Bit Address)
- 9. Module: Table 1-3: PIC18F6XJ1X Pinout I/O Descriptions
- 10. Module: Memory Organization
- 11. Module: Memory Organization
- 12. Module: Electrical Specification
- Document Revision History
- Worldwide Sales and Service

PIC18F87J11 FAMILY
DS80495E-page 6 2011 Microchip Technology Inc.
2. Module: Table 27-2: Comparator
Specifications
On page 399, the maximum Input Offset Voltage
(Parameter No. D300) is changed to ±25 mV.
The parameter numbers for T
RESP and TMC2OV
are changed to D303 and D304, respectively.
A new parameter, D305, for V
IRV is added.
The changed/appended values are indicated in
bold text in the following table:
TABLE 27-2: COMPARATOR SPECIFICATIONS
3. Module: Table 27-4: Internal Voltage
Regulator Specifications
On page 399, the comments column for the CF is
changed. The note, which states “These parame-
ters are characterized but not tested”, is removed.
The changed content is indicated in bold text in the
following table:
TABLE 27-4: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Operating Conditions: 3.0V < VDD < 3.6V, -40°C < TA < +85°C (unless otherwise stated)
Param
No.
Sym Characteristics Min Typ Max Units Comments
D300 V
IOFF Input Offset Voltage — ±5.0 ±25 mV
D301 V
ICM Input Common Mode Voltage 0 — AVDD – 1.5 V
D302 CMRR Common Mode Rejection Ratio 55 — — dB
D303 TRESP Response Time
(1)
— 150 400 ns
D304 T
MC2OV Comparator Mode Change to
Output Valid
—— 10 s
D305 V
IRV Internal Reference Voltage — 1.2 — V
Note 1: Response time measured with one comparator input at (V
DD – 1.5)/2, while the other input transitions
from V
SS to VDD.
Operating Conditions: -40°C < TA < +85°C (unless otherwise stated)
Param
No.
Sym Characteristics Min Typ Max Units Comments
V
RGOUT Regulator Output Voltage* — 2.5 — V
C
F External Filter Capacitor Value* 4.7 10 — F Capacitor must be low series
resistance (<5 Ohms)