User manual

PICkit 3 Programmer-To-Go
 2013 Microchip Technology Inc. DS52116A-page 43
5.6 EXITING PROGRAMMER-TO-GO MODE
To exit from Programmer-To-Go mode, plug the PICkit 3 unit into a PC USB port and
connect to MPLAB X IDE. Select Run>Run Project
and the following message
displays:
“PICkit 3 is in Programmer-to-go mode. The name of the stored image is: ____.
Do you want to stay in Programmer-to-go mode? (Saying no will erase the image
in the PICkit 3.)”
Select No to erase the image and exit Programmer-To-Go mode.