User manual

MPLAB
®
X PICkit™ 3 User’s Guide
DS52116A-page 14  2013 Microchip Technology Inc.
FIGURE 1-1: PICkit™ 3 MCU IN-CIRCUIT DEBUGGER/PROGRAMMER
1.2.1 Lanyard Loop
The lanyard loop provides a point of attachment so that the PICkit 3 can be suspended
or worn.
1.2.2 USB Port Connection
The USB port connection is a USB mini-B connector. Connect the PICkit 3 to the PC using
the supplied USB cable.
1.2.3 Pin 1 Marker
This marker designates the location of pin 1 for proper connector alignment.
6
2
1
3
4
Legend:
1 – Lanyard Loop
2 – USB Port Connection
3 – Pin 1 Marker
4 – Programming Connector
5 – Indicator LEDs
6 – Push Button
5