User manual

User Defined Templates

8.4 MY TEMPLATES

When the User Defined Parameter file has been saved, it will be displayed under the

User Defined Templates > My Templates

on the menu bar, as shown in Figure 8-2.

FIGURE 8-2: SELECTING MY TEMPLATES

Selecting the User Defined template from the menu bar displays My Template window

as shown in Figure 8-3.

FIGURE 8-3: MY TEMPLATES – EXAMPLE

The My Templates window displays the name of the *.udp file in the title bar. For each

line entered in the Create Templates window, the Script is displayed in a button, and

the Parameter is displayed to the right of the button.

Clicking on an individual button will execute the individual Script/Parameter. The con-

verted value will displayed in the box to the right of the button. The executed script will

be logged in the Transactions window.

Clicking on the Execute All button will execute each of the individual buttons in order

from top to bottom. The executed scripts will be logged in the Transactions window.

Clicking on the Clear All button will clear the values in the boxes.

Note: The User Defined Parameter file (*.udp) must be stored in the same direc-

tory as the PICkit Serial Analyzer executable (by default C:\Program

Files\Microchip\PICkit Serial Analyzer). Otherwise it will not be displayed

under the My Templates menu selection.