User manual

USART Asynchronous Communications

6.8 SCRIPT EXECUTE

The Script Execute window is shown in Figure 6-10. Once scripts are created using the

Script Builder, they can be assigned to buttons in the Script Execute window. This

makes a convenient window to execute multiple scripts either individually or iteratively.

Script executing will be logged in the Transactions window.

FIGURE 6-10: USART ASYNCHRONOUS SCRIPT EXECUTE

6.8.1 Assignable Buttons

User created scripts will be displayed in the central USART Scripts column. To assign

a script to a button, click on the script name and drag it to the desired Assignable

Buttons in the right column. The script will be executed once each time the button is

clicked.

The Assignable Buttons can be cleared by clicking on the Clear Buttons button.

USCLKPOLRST [CR] Reset CLOCK POLARITY bit

USINIT [I_] Initialize USART controller

USRESET [RE] Reset USART controller.

USAUX1RST [A1RST] Reset Aux1

USAUX1SET [A1RST] Set Aux1

USAUX1OUT [A1OUT] Set Aux1 direction to Output

USAUX1IN [A1IN] Set Aux1 direction to Input

USAUX1W0 [A1W0] Aux1 Wait 0

USAUX1W1 [A1W1] Aux1 Wait 1

USAUX2RST [A2RST] Reset Aux2

USAUX2SET [A2RST] Set Aux2

USAUX2OUT [A2OUT] Set Aux2 direction to Output

USAUX2IN [A2IN] Set Aux2 direction to Input

USAUX2W0 [A2W0] Aux2 Wait 0

USAUX2W1 [A2W1] Aux2 Wait 1

TABLE 6-2: USART SCRIPT MACRO COMMANDS (CONTINUED)