User manual

PICkit™ Serial Analyzer User’s Guide
DS51647A-page 44 © 2007 Microchip Technology Inc.
FIGURE 5-10: SPI SCRIPT BUILDER – EXAMPLE SCRIPTS
5.7.3 Script Detail
The third column contains Script Detail as shown in Figure 5-11. This column is used
to create the script or view an existing script. More information about creating a
customer script is discussed in Section 5.7.5 “Creating A Script”.
To load a user script from the User Scripts column into the Script Detail column, the
user can double click or right click and select from the local menu.
FIGURE 5-11: I
2
C™ SCRIPT BUILDER – SCRIPT DETAIL
5.7.4 User Scripts
The fourth column contains User Scripts as shown in Figure 5-12. User scripts that are
created, named, and saved are displayed in the User Scripts column.
To load a user script from the User Scripts column into the Script Detail column, the
user can double click or right click and select from the local menu.
User Scripts can be deleted by right clicking and selecting Delete Script from the local
menu.
Example Scripts
Note: The “x” indicates the value is a hexadecimal number. Clicking on “x” will
toggle it to a “d” indicating that the value is a decimal number.
Script Detail