User manual

PICkit™ Serial Analyzer User’s Guide

FIGURE 3-1: PICkit™ SERIAL ANALYZER MAIN WINDOW

3.5 CONFIGURATION WIZARD

If it is the first time that the PICkit Serial Analyzer program is run, the Configuration Wiz-

ard will run automatically. The Configuration Wizard can be manually invoked by select-

ing PICkit Serial Analyzer > Run Configuration Wizard

from the menu bar.

The Configuration Wizard will guide you through the basic steps to configure the PICkit

Serial Analyzer program for a specific communications mode (I

C, SPI, USART).

Advanced configuration can be done from the Configuration Window by selecting PIC-

kit Serial Analyzer > Configure Communications Mode from the menu bar.

As an example, Figure 3-2 through Figure 3-7 show how to configure for I

C Master

mode. Refer to the specific communications chapter for detailed information on the

Configuration Wizard for that communications mode.

The Configuration Wizard Welcome window is shown in Figure 3-2. You may choose

to continue by clicking on the Next button or canceling the wizard by clicking on the

Cancel button.