Datasheet

Optional Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 75
AC244048
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting different -ICE/-ICD devices. To identify this header,
use the following information.
Header Setup and Operation
For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected
device to choose the correct device to emulate.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
Header Dimensions
The following figure lists the dimensions for the debug headers. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
AC Number -ICE/-ICD Device Board Assembly Number
AC244048
PIC16LF1907-ICE 02-02105