Datasheet

PEP and Debug Header Specification
DS50001292W-page 60  2006-2015 Microchip Technology Inc.
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 3-8: DIMENSIONS – AC162078
M
18-Pin Target Pin 1 is located
on bottom side of header
Dimensions are in inches
Top
28-Pin Target Pin 1 is located
on bottom side of header
Side
0.062 Typical
0.560
Typical
0.165 Typical
2.300
0.950
0.410
0.300
0.150
2.050
6-pin Modular Connector
See Appendix B. “Debug Header
Connections” for details.
-ICE Device