Datasheet

Optional Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 55
AC162067, AC162074
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting different -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation
For these headers, connect jumpers J2 and J3 to select between the LF and F versions
of devices.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
Header Dimensions
The figures below list the dimensions for the debug headers. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
AC Number -ICE/-ICD Device Board Assembly Number
AC162067 PIC18F45J10-ICE 02-01854
AC162074
02-01929
Device Device Type Jumper J2 Jumper J3 Function
PIC18LFXXJ10
LF 1-2 1-2
Disable voltage regulator*
PIC18FXXJ10 F 2-3 2-3 Enable voltage regulator
* V
DDCORE must be supplied externally.