Datasheet

PEP and Debug Header Specification
DS50001292W-page 52  2006-2015 Microchip Technology Inc.
AC162065, AC244022
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting different -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation
For this header, there are no jumpers/switches. MPLAB X IDE will use its selected
device to choose the correct device to emulate.
Test points are available on this header to check the following: V
DD, VDDCORE and
ground.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
Header Dimensions
The following figures list the dimensions for the debug headers. Dimensions are design
values in inches.
For this device family, header AC162065 will be sold until depleted. Then, only header
AC244022 will remain as a Performance Pak.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
AC Number -ICE/-ICD Device Board Assembly Number
AC162065 PIC24FJ128GA010-ICE 02-01856
AC244022
02-01985