Datasheet

Required Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 41
Header Dimensions
The figure below lists the dimensions for the debug headers. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 2-14: DIMENSIONS - AC244062
Dimensions are in inches
Target Pin 1 is located
on bottom side of header.
-ICD Device
0.203
0.275
0.150
1.600
1.800
0.410
Typical
0.110
Typical
0.165 Typical
Side
Top
-ICD
Device
6-pin SIL Connector
(0.100 pin spacing)
See Appendix B. “Debug Header
Connections” for details.
0.062 Typical Board Thickness