Datasheet

Required Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 39
Header Dimensions
The figure below lists the dimensions for the debug headers. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 2-13: DIMENSIONS - AC244051, AC244052, AC244061
Dimensions are in inches
Side
Top
Target Pin 1 is located
on bottom side of header.
-ICE/-ICD Device
8-pin SIL Connector
(0.100 pin spacing)
See Appendix B. “Debug Header
Connections” for details.
1.640
0.270
0.620
1.930
0.570
0.165
Typical
0.260
Typical
0.062
Typical
-ICE/-ICD
Device