Datasheet

PEP and Debug Header Specification
DS50001292W-page 38  2006-2015 Microchip Technology Inc.
AC244051, AC244052, AC244061
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting different -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation
For these headers, there are no jumpers/switches. MPLAB X IDE will use its selected
device to choose the correct device to emulate.
These headers support 8-, 14- and 20-pin devices. For 8- and 14-pin devices, make
sure device pin 1 is placed at the 20-pin connector pin 1.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
AC Number -ICE/-ICD Device Board Assembly Number
AC244051 PIC16F1509-ICE
02-02208
AC244052 PIC16LF1509-ICE
AC244061 PIC16F527-ICD